Vannes en acier forgé API 602
API 602 forged steel check valves prevent backflow on small-bore high-pressure lines. Lift (piston) and ball types give good sealing on lines with vibration and pulsation; swing types are preferred where low pressure drop is required.
Overview
They are supplied with a bolted or welded bonnet; ends are NPT, socket-weld, butt-weld or flanged. Lift types are generally installed in horizontal lines, while spring-loaded designs can be used in other orientations. For how lift, ball and swing designs compare, see check valve types explained.
Technical specifications
| Taille | ½”–2″ (DN15–DN50) |
|---|---|
| classe de pression | Class 800 and 1500 (API 602); Class 2500 to ASME B16.34 |
| Taper | Lift (piston), ball, swing |
| End connections | NPT, SW, BW, flanged |
| Materials | A105N, LF2, F11, F22, F316 |
Key features
- Compact forged body for high pressure
- Good sealing on vibrating lines
- Spring-loaded design options
Standards and construction
- Design: API 602 / ISO 15761, ASME B16.34
- End connections: socket weld (ASME B16.11), threaded NPT (ASME B1.20.1), butt weld (ASME B16.25), flanged (ASME B16.5)
- Bonnet types: bolted or welded cover (pressure seal in high classes, to ASME B16.34); piston, ball and swing internals
- Port: standard (reduced) or full port
- Testing: API 598
Material combinations
| Combination | Body / bonnet | Garniture | Service typique |
|---|---|---|---|
| A105 / F6a | A105 | 13Cr (F6a) | General hydrocarbon, water, air, steam |
| A105 / F6a + hardfacing | A105 | 13Cr + CoCr hardfaced seat | Steam, high temperature, abrasive service |
| LF2 / 304 | A350 LF2 | 304 | Low temperature (down to approximately −46 °C) |
| F11 / F6a + hardfacing | A182 F11 | 13Cr + CoCr hardfacing | Superheated steam, high temperature |
| F304 / 304 | A182 F304 | 304 | Corrosive service |
| F316 / 316 | A182 F316 | 316 | Corrosive and chemical service |
| F51 / F51 | A182 F51 (duplex) | F51 | Chloride environments; seawater depending on conditions |
Documentation and testing
On industrial projects the documentation package matters as much as the valve. We confirm the certificate and test scope for every line item at quotation stage:
- EN 10204 3.1 material certificates for pressure-retaining and wetted parts, traceable by heat number
- EN 10204 3.2 with third-party inspection, on request
- Pressure test reports to API 598 or EN 12266-1: shell, seat and, where specified, gas tests
- Fire-test certificates (API 607 / ISO 10497) for fire-safe type-tested designs
- PMI reports for alloy and stainless materials
- Dimensional, visual and coating inspection records
- PED 2014/68/EU CE declaration for equipment within its scope
- NACE MR0175 / ISO 15156 compliance statement for sour (H₂S) service
Technical datasheet
Foire aux questions
In which orientation is a lift check valve installed?
Lift (piston) check valves without springs are generally installed in horizontal lines with the bonnet upward. Spring-loaded designs can also be used vertically and in other orientations; the installation orientation should be stated in the order.
Produits associés
API 602 Forged Steel Gate Valve
½”–2″, Class 800 and 1500; NPT, SW, BW and flanged ends.
View detailsAPI 602 Forged Steel Globe Valve
½”–2″, Class 800 and 1500; drain, vent and instrument lines.
View detailsRequest a quote: API 602 Forged Steel Check Valve
Share your valve list, datasheet or project specification. We review standards, materials and documentation line by line and return an itemized offer, with any deviation from the specification stated in writing.