Vannes DIN / EN
DIN / EN check valves are swing and lift non-return valves that match existing lines one-for-one in plants engineered to European standards. With EN 558 face-to-face dimensions and EN 1092-1 flanges, they allow direct replacement.
Overview
Swing types offer low pressure drop; lift types offer tight sealing and good performance on steam lines. Tests are carried out to EN 12266-1, and certificates are issued with EN material numbers.
Technical specifications
| Taper | Swing, lift |
|---|---|
| Pressure rating | PN16, PN25, PN40, PN64 |
| End connections | EN 1092-1 flanged, EN 558 face-to-face |
| Materials | 1.0619, 1.7357, 1.4408 and other EN materials |
| Essai | EN 12266-1 |
Key features
- One-for-one replacement in DIN lines
- Swing and lift options
- Certificates with EN material numbers
Standards and test pressures
- Design: EN 16767 (steel check valves); lift type with DIN 3356 / EN 13709 body construction
- Face-to-face: DIN 3202 / EN 558
- Flanges: EN 1092-1 (DIN 2543–2547)
- Testing: EN 12266-1 (DIN 3230)
Under EN 12266-1, the hydrostatic shell test is carried out at 1.5 times the valve’s allowable pressure (PS) at 20 °C and the seat test at 1.1 times PS. The values below apply to material groups in which PS equals PN:
| Nominal pressure | Test de coquille | Seat test |
|---|---|---|
| PN 16 | 2.4 MPa (24 bar) | 1.76 MPa (17.6 bar) |
| PN 25 | 3.75 MPa (37.5 bar) | 2.75 MPa (27.5 bar) |
| PN 40 | 6.0 MPa (60 bar) | 4.4 MPa (44 bar) |
| PN 64 | 9.6 MPa (96 bar) | 7.04 MPa (70.4 bar) |
Documentation and testing
On industrial projects the documentation package matters as much as the valve. We confirm the certificate and test scope for every line item at quotation stage:
- EN 10204 3.1 material certificates for pressure-retaining and wetted parts, traceable by heat number
- EN 10204 3.2 with third-party inspection, on request
- Pressure test reports to API 598 or EN 12266-1: shell, seat and, where specified, gas tests
- Fire-test certificates (API 607 / ISO 10497) for fire-safe type-tested designs
- PMI reports for alloy and stainless materials
- Dimensional, visual and coating inspection records
- PED 2014/68/EU CE declaration for equipment within its scope
- NACE MR0175 / ISO 15156 compliance statement for sour (H₂S) service
Technical datasheet
Foire aux questions
What should be considered when selecting a DIN check valve?
The PN rating and EN 558 face-to-face series of the existing line, the correct size for the flow velocity, the installation orientation (horizontal or vertical), and material suitability for high-temperature services such as steam.
Produits associés
DIN / EN Flanged Ball Valve
EN 1092-1 flanged, PN16–PN100; floating and trunnion mounted designs.
View details
DIN / EN Gate Valve
EN 1092-1 flanged, PN16–PN64; handwheel or electric actuator.
View details
DIN / EN Globe Valve
DIN 3356 / EN 13709, PN16–PN64; steam and hot water lines.
View detailsRequest a quote: DIN / EN Check Valve
Share your valve list, datasheet or project specification. We review standards, materials and documentation line by line and return an itemized offer, with any deviation from the specification stated in writing.