Vannes en acier forgé API 602
API 602 forged steel gate valves are used on small-bore (typically ½”–2″) high-pressure lines for drain, vent, sampling and instrument connections. The forged body is compact and robust; Class 800 is the industry standard class for small threaded and socket-weld valves.
Overview
The common API 602 design is a bolted bonnet with outside screw and yoke (OS&Y); a welded bonnet is used where extra protection against leakage is required, while pressure seal bonnets in higher classes are supplied to ASME B16.34. Full port or standard (reduced) port options are available. Ends can be NPT threaded to ASME B1.20.1, socket-weld to ASME B16.11, butt-weld or flanged.
Technical specifications
| Taille | ½”–2″ (DN15–DN50); up to DN100 within the scope of API 602 |
|---|---|
| classe de pression | Class 800 and 1500 (API 602); Class 2500 to ASME B16.34; Class 150–1500 for flanged types |
| End connections | NPT threaded, socket-weld (ASME B16.11), butt-weld, flanged |
| Bonnet | Bolted, welded (API 602); pressure seal to ASME B16.34 |
| Materials | A105N, LF2, F11, F22, F304, F316, F51 |
| Garniture | 13Cr, Stellite hard-faced seats, 316; by API trim number |
Key features
- Compact, robust forged body
- Full port or standard port option
- Welded bonnet to reduce leakage risk
- Threaded, SW, BW and flanged end options
Standards and construction
- Design: API 602 / ISO 15761, ASME B16.34
- End connections: socket weld (ASME B16.11), threaded NPT (ASME B1.20.1), butt weld (ASME B16.25), flanged (ASME B16.5)
- Bonnet types: bolted bonnet (OS&Y), welded bonnet; pressure seal designs to ASME B16.34
- Port: standard (reduced) or full port
- Testing: API 598; on request, packing type-tested for low emissions (ISO 15848-1 / API 624)
Material combinations
| Combination | Body / bonnet | Garniture | Service typique |
|---|---|---|---|
| A105 / F6a | A105 | 13Cr (F6a) | General hydrocarbon, water, air, steam |
| A105 / F6a + hardfacing | A105 | 13Cr + CoCr hardfaced seat | Steam, high temperature, abrasive service |
| LF2 / 304 | A350 LF2 | 304 | Low temperature (down to approximately −46 °C) |
| F11 / F6a + hardfacing | A182 F11 | 13Cr + CoCr hardfacing | Superheated steam, high temperature |
| F304 / 304 | A182 F304 | 304 | Corrosive service |
| F316 / 316 | A182 F316 | 316 | Corrosive and chemical service |
| F51 / F51 | A182 F51 (duplex) | F51 | Chloride environments; seawater depending on conditions |
Documentation and testing
On industrial projects the documentation package matters as much as the valve. We confirm the certificate and test scope for every line item at quotation stage:
- EN 10204 3.1 material certificates for pressure-retaining and wetted parts, traceable by heat number
- EN 10204 3.2 with third-party inspection, on request
- Pressure test reports to API 598 or EN 12266-1: shell, seat and, where specified, gas tests
- Fire-test certificates (API 607 / ISO 10497) for fire-safe type-tested designs
- PMI reports for alloy and stainless materials
- Dimensional, visual and coating inspection records
- PED 2014/68/EU CE declaration for equipment within its scope
- NACE MR0175 / ISO 15156 compliance statement for sour (H₂S) service
Technical datasheet
Foire aux questions
What does Class 800 mean?
Class 800 is an intermediate pressure class defined in API 602 for small forged valves, between Class 600 and Class 900. It is the common standard for small valves with threaded and socket-weld ends.
Forged gate valve or forged globe valve?
A gate valve is used for full open/close isolation; a globe valve is preferred on drain and vent lines that need throttling, frequent operation or tighter shutoff.
Produits associés
API 602 Forged Steel Globe Valve
½”–2″, Class 800 and 1500; drain, vent and instrument lines.
View detailsAPI 602 Forged Steel Check Valve
Lift, ball and swing types; ½”–2″, Class 800 and 1500.
View detailsRequest a quote: API 602 Forged Steel Gate Valve
Share your valve list, datasheet or project specification. We review standards, materials and documentation line by line and return an itemized offer, with any deviation from the specification stated in writing.