Grooved Ball Valves New York: UL Listed and FM Approved Grooved-End Brass Ball Valves for NFPA 13 Sprinkler, Standpipe and Fire Pump Test Header Applications
ValveAtlas supplies UL Listed and FM Approved grooved-end ball valves (UVBG-050, UVBG-065, UVBG-080, UVBG-100, UVBG-150 and UVBG-200) in DN50 through DN200 (2″ through 8″) with bronze or ductile iron body, hard-chrome plated brass ball, PTFE seats and lever or gear-operator to fire protection contractors and mechanical subs across New York. 300 psi working pressure. Full NFPA 13 compliance and FDNY acceptance under NYC Building Code BC 2022.
Technical reference for New York sprinkler contractors and fire pump installers at JFK, One World Trade Center, Empire State Building and Columbia University. Grooved-end ball valve is the preferred isolation valve for fire pump test header, sprinkler branch isolation and small-line standpipe drain where full-port flow and bubble-tight shutoff are required. Faster installation than flanged ball valves with matching performance.
UNIVAL UVBG product range for New York projects
UVBG-050 through UVBG-200 covers 2″ through 8″ grooved ends per AWWA C606 grooving dimensions. Body is ASTM B584 cast bronze (small sizes) or ASTM A536 ductile iron (large sizes) with red epoxy coating. Ball is hard-chrome plated brass with full-port bore. Seats are reinforced PTFE for bubble-tight shutoff. Lever handle on sizes 2″-4″; gear operator on 6″ and 8″.
Why New York contractors choose ValveAtlas grooved ball valves
UL 842 and FM 1160 dual listing. UVBG carries UL 842 (Valves for Flammable Fluids, grooved-end variant for fire protection) and FM 1160 (Ball Valves for Fire Protection Service) listing.
Full-port hard-chrome plated brass ball. No flow restriction and bubble-tight shutoff. Chrome plating protects against pitting corrosion in galvanized pipe systems.
Grooved ends per AWWA C606. Matches Victaulic, Shurjoint and Anvil grooved couplings on the same main. Faster installation than flanged, especially on 6″ and 8″ where overhead clearance is limited.
Competitor substitution for New York projects
Victaulic Series 75/76 grooved ball valve, Shurjoint B76 and NIBCO T-585 grooved ball valve all substitute one-for-one with UVBG at matching size and operator type. Same UL 842 and FM 1160 listing. Factory submittal available for FDNY acceptance.
Related New York products
See also: Butterfly valves New York, Grooved check valves New York, Grooved couplings, Fire pumps New York.
Contact ValveAtlas for New York grooved ball valves quotation
Email UVBG quotation requests and Victaulic/Shurjoint/NIBCO substitution submittals for FDNY approval to info@valve-atlas.com.
Why Engineers Trust ValveAtlas for Grooved Ball Valves New
ValveAtlas is the trusted grooved ball valves new supplier for fire protection contractors, mechanical engineers, and industrial end users across Canada, the United States, and London, UK. Every grooved ball valves new order ships with mill test certificates, UL/FM compliance letters, and dimensional drawings ready for engineer-of-record submittal. Reach the ValveAtlas team for grooved ball valves new quotations, code authority liaison, and project staging support.
Related Locations
- Dry Pipe Valves Toronto | UL/FM/UL NFPA 13 Ch 7 Differential Dry Pipe Valves with Trim | ValveAtlas
- Fire Pumps Montreal | UL NFPA 20 Fire Pumps Quebec | ValveAtlas
- Fire Protection Supplier in Boston, Massachusetts
Codes & Industry Standards
Every grooved ball valves new shipment from ValveAtlas is supported by the following code and listing references: