Deluge Valves Toronto: UL Listed and FM Approved Electric, Pneumatic and Hydraulic Deluge Valves for Toronto Aircraft Hangars, Transformer Yards, Petrochemical Loading and Cable Tunnel Protection
ValveAtlas supplies UL 260 Listed and FM Class 1020 Approved deluge valves, foam-water proportioners, pneumatic and hydraulic actuators, electric solenoid release assemblies and complete NFPA 13, NFPA 15 and NFPA 11 trim packages to fire protection contractors, consulting engineers, oil and gas EPCs and power utility general contractors across Toronto, Mississauga, Brampton, Vaughan, Markham, Oshawa, Hamilton, Ottawa and Sarnia. Toronto HQ warehouse, factory-assembled trim kits, OBC submittals and Toronto Fire Services compliance documentation.
This page is the technical reference for Toronto specifying engineers, mechanical contractors and sprinkler installers selecting deluge valve packages for Toronto-area airport aircraft hangars, utility transformer yards, Sarnia petrochemical loading platforms, LNG terminals, transit tunnel cable protection, turbine enclosures and any high-hazard or open-directional spray application, governed by 2012 OBC as amended, NFPA 13, NFPA 15 (water spray fixed systems), NFPA 11 (foam and foam-water deluge), UL 260 and FM 1020.
Deluge valve range for Toronto projects
| Type | SKU | Size | Max working pressure | Listings | Typical Toronto application |
|---|---|---|---|---|---|
| Deluge valve electric release | UVDV-6-ES | 6 inch NPS | 250 psi | UL 260, FM 1020 | Airport aircraft hangar electric solenoid release |
| Deluge valve electric release | UVDV-8-ES | 8 inch NPS | 250 psi | UL 260, FM 1020 | Large hangar or transformer yard deluge |
| Deluge valve pneumatic release | UVDV-6-PN | 6 inch NPS | 250 psi | UL 260, FM 1020 | Toronto petrochemical loading pneumatic release |
| Deluge valve hydraulic release | UVDV-6-HY | 6 inch NPS | 250 psi | UL 260, FM 1020 | Open-sprinkler pilot line hydraulic release |
| Deluge valve large bore | UVDV-10 | 10 inch NPS | 250 psi | UL 260, FM 1020 | Bulk petrochemical storage, LNG terminal deluge |
| Foam-water proportioner | UVPP-FOAM-3 | 3% AFFF balanced-pressure | 250 psi | UL 162, FM | NFPA 11 foam-water deluge for hangar or fuel storage |
| Releasing control panel | UVDV-RCP | N/A | 24 VDC | UL 864 Listed | UL 864 Ninth Edition releasing panel with battery backup |
| Factory trim kit | UVDV-TRIM | All sizes | 250 psi | UL, FM | Priming cup, main drain, alarm test, solenoid release, manual release |
Why Toronto contractors choose ValveAtlas deluge valves
UL 260 and FM 1020 dual listing. Every deluge valve we supply is UL 260 Listed and FM Class 1020 Approved. TFS accepts listed deluge valves with factory trim kit, OBC compliance letter, NFPA 13 and NFPA 15 submittal package and UL 864 Ninth Edition releasing panel documentation.
Electric, pneumatic and hydraulic release options. UVDV-ES electric solenoid release (24 VDC), UVDV-PN pneumatic release (supervisory air pilot line), UVDV-HY hydraulic release (wet pilot open-sprinkler line) configurations to match detection strategy per NFPA 13. Electric release standard for Toronto aircraft hangars with UL 864 releasing panel and heat/flame detection.
Foam-water deluge NFPA 11. UVDV with UVPP-FOAM-3 balanced-pressure AFFF 3% or 6% foam proportioner for NFPA 11 aircraft hangar, flammable liquid storage, combustible liquid loading platform and turbine enclosure fire protection. UL 162 Listed foam concentrates.
Factory-assembled trim with manual release. Complete deluge valve trim per NFPA 13 and NFPA 15, including priming cup, main drain, alarm test, manual emergency release valve, pressure gauges, supervisory switches and low-air/loss-of-air switches. Plug-and-play delivery to Toronto hangar, substation or loading platform mechanical room.
Code and listing acceptance for Toronto
Ontario Building Code. The OBC adopts NFPA 13 with Ontario amendments for sprinkler installation. Deluge and water spray systems required in areas where open-directional protection is needed per NFPA 13, NFPA 15 and NFPA 11.
NFPA 13 deluge systems. NFPA 13 deluge system requirements for general design, release systems, hydraulic design and trim govern Toronto deluge valve installation. Our trim packages ship NFPA 13 compliant.
NFPA 15 Water Spray Fixed Systems. NFPA 15 governs deluge water spray for transformers, cable trays, combustible liquid storage, loading racks and process vessels. UVDV with directional or full-cone nozzles meets NFPA 15 design requirements.
NFPA 11 Foam-Water Deluge. NFPA 11 governs foam-water deluge and foam-water spray for aircraft hangars, flammable liquid storage, turbine enclosures. UVPP-FOAM-3 balanced-pressure proportioner meets NFPA 11 proportioning accuracy requirements.
NFPA 409 Aircraft Hangars. NFPA 409 Group I/II/III/IV hangars require foam-water deluge. UVDV-6-ES or UVDV-8-ES with UVPP-FOAM-3 and UL 864 cross-zoned heat/flame detection meets NFPA 409 requirements for Toronto and Hamilton airport hangars.
Toronto Fire Services acceptance. TFS final inspection references NFPA 13, NFPA 15, NFPA 11 and NFPA 409 factory documentation, releasing panel wiring diagram and acceptance testing per NFPA 25. Factory trim drawing and UL/FM certificates provided with every Toronto deluge shipment.
Approved-equal submittals
Where a specification names a specific manufacturer, we prepare an approved-equal submittal package (listing certificates, dimensional drawings and material data) for review by the engineer of record and the authority having jurisdiction.
Detection and releasing for Toronto deluge systems
Heat detection for hangar deluge. UL 521 Listed fixed-temperature or rate-of-rise heat detectors cross-zoned per NFPA 409. UVDV-RCP UL 864 releasing panel SLC addressable loop supports up to 159 detectors per loop.
Flame detection for petrochemical. UL Listed UV/IR and triple IR3 optical flame detectors for Sarnia petrochemical loading, transformer yard and turbine enclosure deluge release.
Linear heat detection for cable tunnels. UL Listed linear heat detection cable for subway tunnel, cable tray and under-floor deluge release in transit and rail cable tunnels.
Manual emergency release. UVDV-MV manual pull station at hangar door and transformer yard perimeter per NFPA 15 and NFPA 409 requirements for operator-initiated deluge release.
Toronto-specific delivery and installation logistics
Toronto-area airport aircraft hangars. Airline and air cargo maintenance hangars with NFPA 409 foam-water deluge. Direct truck freight from Toronto HQ with airside clearance coordination.
Utility transformer yards. 500 kV and 230 kV substation transformers with NFPA 15 water spray deluge. UVDV-6-ES with UV/IR flame detection and pressure regulating standpipe valve trim.
Sarnia refinery and petrochemical loading. Tank farm, loading rack and rail loading spur deluge with UVPP-FOAM-3 AFFF proportioning. NFPA 30 compliant flammable liquid storage deluge design.
LNG and natural gas processing. LNG terminal loading arms, process vessel deluge, turbine enclosure. UVDV-10 large bore with UL 864 releasing panel and triple IR flame detection.
Transit cable tunnels and turbine halls. Subway cable tunnels, commuter rail station tunnels and nuclear generating station turbine halls. UVDV-6-ES with linear heat cable detection and cross-zoned solenoid release.
Related products for complete Toronto deluge package
Fire pumps. UVFP-HSC, UVFP-ES and UVFP-VIL fire pumps for deluge water supply, sized per NFPA 15 water demand. See Fire Pumps Toronto.
Pre-action valves. UVPA-SI/UVPA-DI/UVPA-NI for server rooms adjacent to deluge-protected areas. See Pre-Action Valves Toronto.
Butterfly valves. UVB-G310 grooved butterfly with integral tamper for deluge system isolation. See Butterfly Valves Toronto.
Test and drain valves. UVT-TD-300 main drain and alarm test trim. See Test and Drain Valves Toronto.
Frequently asked questions (Toronto)
Are these deluge valves accepted by TFS? Yes. Our deluge valves are UL 260 Listed and FM 1020 Approved. TFS accepts listed deluge valves with factory trim kit, OBC compliance letter, NFPA 13 and NFPA 15 or NFPA 11 submittal package.
When do I need electric vs pneumatic vs hydraulic release? Electric release (UVDV-ES): solenoid operated by UL 864 releasing panel and electronic detection, standard for aircraft hangars and Tier III/IV critical spaces. Pneumatic release (UVDV-PN): supervisory air pilot line released on detection, standard for petrochemical loading with air supply. Hydraulic release (UVDV-HY): wet pilot open-sprinkler line, standard for transformer yards and outdoor cable tray deluge with no electronic detection.
Do you provide foam-water deluge? Yes. UVDV with UVPP-FOAM-3 balanced-pressure AFFF 3% or 6% foam proportioner meets NFPA 11 proportioning accuracy requirements for aircraft hangar, flammable liquid storage and turbine enclosure applications. UL 162 Listed foam concentrates available.
What is the delivery time to Toronto? Factory-assembled trim kits ship 4 to 6 weeks from order. Stock UVDV-6-ES and UVDV-8-ES ship 2 to 3 weeks. Same-day truck freight from Toronto HQ.
Contact ValveAtlas for Toronto deluge valve quotation
For deluge valve trim quotations, approved-equal submittals for TFS approval, or factory-assembled NFPA 13 deluge, NFPA 15 water spray or NFPA 11 foam-water deluge trim packages with UL 864 releasing panel for Toronto aircraft hangars, transformer yards, petrochemical loading, LNG terminals or cable tunnel projects, email the project hydraulic calculations, detection layout, releasing panel matrix and water spray or foam proportioning plan to info@valve-atlas.com or use the contact form. Same-day response on Toronto airport or Sarnia petrochemical urgent orders.